|
Fresh
Start All Purpose 100% Acrylic
Interior/Exterior
Latex Primer 023 |
|
Interior/Exterior |
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
premium quality, 100% Acrylic interior/exterior primer
formulated for sealing and suppressing most bleeding
type stains including: crayon, graffiti, grease marks,
water stains, cedar and redwood bleed, asphalt,
creosote, rust and smoke.
Can
be used over existing oil or latex paint and performs
equally well under all of Benjamin Moore's architectural
finish coat products, oil and latex. For interior use on
new or previously painted wood, plywood, drywall,
ceiling tile, Formica, Masonite, ceramic tile, and cured
plaster.
For
exterior use on new or previously painted wood, aluminum
and hardboard siding, shingles, shakes, concrete,
masonry, brick and metal surfaces. Provides a total
latex system, offering excellent resistance to
blistering on new construction. Easy to apply. Excellent
hiding and leveling properties. May be tinted with up to
2.0 fl. oz. of Benjamin Moore colorants per gallon. |
|
Colors
Available: White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior/Exterior |
Flat |
100%
Acrylic |
Water |
|
Fresh
Start® All Purpose Alkyd Primer 024 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
premium quality alkyd primer for use as an undercoater,
sealer or stain blocking primer. Formulated for
suppressing most bleeding type stains including: crayon,
graffiti, grease marks, water stains; cedar and redwood
bleed, asphalt, creosote, rust stains, and smoke. This
all purpose primer can be used over oil or latex paint
and performs equally well under all Benjamin Moore &
Co. architectural finish coat products.
|
|
Colors
Available:
White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior/Exterior |
Flat |
Alkyd |
Mineral
Spirits |
|
Moore's
Quick Dry Stain Blocking Primer 202 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
general purpose solvent-thinned primer, sealer, and
stain suppressor. Holds back water-soluble stains and
most "bleeding" stains such as lipstick,
crayon, and grease. Effectively primes and seals charred
or smoke stained surfaces. For interior use on bare or
previously painted wood, plaster, drywall, plywood, and
hardboard surfaces. May be used as a spot-primer on
exterior wood surfaces such as sealing knots or sap
streaks. Seals porous surfaces such as old flat wall
paints and patches on previously painted surfaces. Does
not raise grain of wood.
|
|
Colors
Available: White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
Alkyd |
Mineral
Spirits |
|
Wall-Grip
1,2,3 203 |
|
|
MSDS |
|
|
|
 A
group of primer-sealers designed especially for use
under wallcoverings. Excellent sealing qualities
facilitate the positioning and pattern matching of
wallcoverings, smoothing out wrinkles and air pockets.
Wall-Grip provides a base which allows pastes and
adhesives to bond well, and helps prevent the opening of
seams. Makes wallcovering application easier and less
time consuming. Indispensable value over unusually
difficult surfaces such as recovering vinyl with vinyl.
No unpleasant odor. Spreads and dries quickly.
Wall-Grip
l (203-01):
A transparent acrylic latex sealer for application to previously
painted or hard/glossy surfaces such as glass,
formica, or ceramic tile: it also allows new
wallcovering to adhere to previously hung vinyl.
Wall-Grip 1 will also prime bare plaster and wallboard
for top coating with both solvent and latex paints.
Wall-Grip
2 (203-02):
A pigmented acrylic blended latex sealer for priming
and sealing bare wallboard. Facilitates stripping of
wallcoverings without damage to substrate. Do not use
under pre-pasted wall-coverings. Wall-Grip 2 may also be
used to prime bare wallboard for top coating with both
solvent and latex paints. Can be tinted to pastel shades
with up to 2.0 fl. oz. Benjamin Moore Colorants per
gallon of sealer. For use under wallcoverings which do
not fully mask the substrate.
Wall-Grip
3 (203-03):
A transparent acrylic latex sealer for use under pre-pasted
or heavy wallcoverings where adhesion is a problem.
|
|
Colors
Available: Wall-Grip
1: light blue tint, Wall-Grip 2: white, Wall-Grip 3:
light green tint |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Low
Lustre |
Latex |
Water |
|
Regal
FirstCoat All Purpose Interior Latex Primer 216 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
premium quality, full-bodied, smooth-flowing acrylic
blended latex primer that provides excellent sealing and
enamel holdout characteristics for virtually all
interior surfaces. Regal FirstCoat is easy working,
spatter proof, and quick drying. This high hiding primer
can be top coated with all types of latex and solvent
paints. Also available as a Deep Color Base for use
under deep tone designer finishes where the transparency
of the finish coat can be a problem. In most cases, two
coats of the deep tone finish over a tinted Deep Color
Base primer will produce a depth and uniformity of color
not possible otherwise. Rapid drying assures a primer /
finish job in one day. Exhibits excellent holdout and
hiding qualities. Performs equally well under latex or
oil finishes.
|
|
Colors
Available: White,
Deep Color Base |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
Acrylic
Latex |
Water |
|
Moore's
Alkyd Enamel Underbody C217 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
superior quality, smooth flowing, heavy-bodied solvent
thinned underbody for interior use on new or previously
cured plaster, masonry, wood, or metal. Formulated
specifically as an undercoater for enamels and gloss or
semi-gloss paints, it exhibits outstanding holdout,
leveling, and sanding properties.
Also
available as a Deep Color Base for use under deep tone
designer finishes where the transparency of the finish
coat can be a problem. In most cases, two coats of the
deep tone finish over a tinted Deep Color Base primer
will produce a depth and uniformity of color not
possible otherwise. Flows out to a smooth, dense,
non-absorbent film. Provides an ideal foundation for
enamel finishes because of its excellent adhesion.
Hardens quickly and can be sanded easily without
excessive gunning of the paper. |
|
Colors
Available: White,
Deep Color Base |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Low
Lustre |
Alkyd |
Mineral
Spirits |
|
Moorcraft®
Super Spec Alkyd Enamel Undercoater
&
Primer Sealer C245 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
high performance, interior alkyd based primer. For
new or previously painted trim, doors, walls, and
ceilings. Ideal for wood, cured plaster, masonry,
painted wallboard and rust free, ferrous metal. Combines
the sealing and enamel holdout features of an alkyd
primer sealer and an enamel underbody. Excellent
adhesion properties, even to glossy surfaces. Seals a
variety of porous and non-uniform surfaces while
creating a vapor barrier film. Performs equally well
underneath either Benjamin Moore's latex or solvent
based paints.
|
|
Colors
Available: White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Low
Lustre |
Modified
Alkyd |
Mineral
Spirits |
|
Moorcraft
Super Spec Latex Enamel
Undercoater
& Primer Sealer 253 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 An
acrylic blended latex primer designed for multiple uses.
For new or previously painted drywall construction,
plaster, composition board, non bleeding woods and
concrete. Suitable for exterior masonry and block
construction that is in sound, chalk-free condition.
Excellent
holdout and adhesion properties, even to glossy
surfaces. Easy to apply and dries quickly. Ideal for
sealing a variety of porous and non-uniform surfaces.
Performs equally well under either latex or
solvent-based paints. Easy to apply, spatter resistant,
rapid dry for quick recoating, soap and water cleanup. |
|
Colors
Available:
White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
Acrylic
Blended Latex |
Water |
|
MOORCRAFT
SUPER HIDE Latex Primer/Undercoater 284 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
quality, acrylic blended latex primer-undercoater
designed for use under Benjamin Moore's Super Hide
coatings. Ideal for priming and sealing unpainted
drywall and wallboard. Other uses include
non-staining wood, cured plaster and concrete surfaces.
Easy to apply and dries quickly. Spatter resistant.
Excellent hold-out. Low odor.
|
|
Colors
Available:
White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
Acrylic
Blended Latex |
Water |
|
Moorcraft
Super Craft Latex Block Filler 285 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
full-bodied and high hiding latex block filler
specifically formulated for easier spray application.
Designed to be used as a preparatory coating to
create a less porous, smoother painting surface. Fills
small cracks and voids in concrete, cinder block, and
rough masonry. Can be used with either interior or
exterior Benjamin Moore & Co finish coatings. Can be
used on exterior masonry surfaces when properly top
coated with a Benjamin Moore exterior finish product.
|
|
Colors
Available:
White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
100%
Acrylic Latex |
Water |
|
MOORCRAFT
SUPER CRAFT Interior Latex Primer 250 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
An
economical, fast drying, pva latex primer and sealer.
Fast drying, Ideal for wallboard; will not raise nap,
Minimal roller spatter, Effective undercoater for alkyd
or latex finishes, Excellent hiding, Heavy bodied, Can
be top coated with latex or oil based finishes. May be
tinted with up to 2.0 fl. oz of Benjamin Moore colorants
per gallon. |
|
Colors
Available:
White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
PVA
Latex |
Water |
|
PRISTINE
Eco Spec™ Interior Latex Primer Sealer 231 |
|
|
MSDS |
Technical
Data Sheet (pdf) |
|
|
 A
low odor, low VOC, 100% acrylic interior latex primer
sealer with spatter resistant properties. Pristine Eco
Spec is ideally suited for commercial, facility
management, and residential applications. Pristine Eco
Spec does not have the odor of conventional primers
which contain ingredients known as Volatile Organic
Compounds (VOCs).
Always
use Pristine Eco Spec Interior Latex Primer Sealer as a
first coat when a low odor, VOC free primer/finish
system is required. Low VOCs, Low odor, 100% Acrylic,
Spatter-resistant, Exhibits excellent holdout
properties, Quick return to service. May be tinted with
up to 2.0 fl. oz of Benjamin Moore colorants per gallon.
Note that Benjamin Moore colorants contain minimal
amounts of VOC. When tinted, these colors will contain a
small amount of VOC which will not affect the paint
odor.
Additional Information
|
|
Colors
Available:
White |
|
Use |
Gloss
Level |
Type |
Clean
Up With |
|
Interior |
Flat |
100%
Acrylic Latex |
Water |
|
|
|
|
